TCase T4 to Dana 300
OldJarhead
Jeeper
First off, hello to all. Not much of an internet guy but I have an issue that is giving me some headaches. '83 CJ7, 258, T4, Dana 300. Put in a new clutch this year and decided that it'd be easier to split the trans and transfer for removal. threw it all back together and, lo and behold, now had a leak with the rear tranny seal. Took the transfer off and installed a new seal, set it all the way in. Guess what, leaking again. took it apart and threw another one in. Flush this time. Guess what, leaks. Trying to figure out what the heck she wants. Any ideas? Thinking about just sealing between the two and filling the weep hole. Dry socket there and, it filling with ATF, shouldn't hurt anything I believe. Only thing that comes to mind would be a pressure build up but, I'm thinking, pressure should go back into either the trans or the transfer and blow out the vents. Definitely would love to get some input on this one. On the plus side, removing the transfer case is getting to be really easy for me.