Ring gear - pitting / porosity??
sjc115
Jeeper
- Posts
- 88
- Thanks
- 0
- Location
- Pittsburgh, PA
- Vehicle(s)
- 1979 CJ7
258ci Inline 6
T-18 Manual Trans
Dana 20 T-Case
Dana 30/AMC 20 Axles
2" OME Wrangler Springs
I took my AMC20 rear end out to swap the axles to one piece units and while looking at the gears I noticed something off on some of the teeth (see pictures). A couple of the teeth appear to be pitted. Is this okay? Are the gears still usable like this?