Engine Anyone running NYLON fuel lines? Fitting questions
NotTJ
Jeeper
Now that I have my new galvanized tank ready to swap in I also need to delete the original steel fuel lines. They don't look horrid but certainly not worth salvaging. Also at some point the return vapor line off the fuel filter was eliminated off my engine and I would like that reinstalled. So the plan was to run a 5/16 and 1/4 nylon line straight up from the tank. The question I have is how did you adapt it to the tank? I suspect I need a barbed fitting pressed into the nylon that clamps to a short rubber line - does that sound right? That would mate at the tank and I could do the same to mate to the fuel pump. Am I on the right track?