Trans SM465 to a Iron Duke 4 cyl

[Super8mm]

Has anyone swaped a SR4 for a SM465 on a 1980 CJ5 4 cyl?

If so what throw out bearing did you use?

 

[TSB8C]

Novak makes an adjustable throwout bearing for AMC engines. It is their part # TB2 and is about $100 on their web site.

You could also check this link for a list and sizing chart: Bearing Chart

 

[Super8mm]

Thanks for the link,

I will have to talk with Jeff at Novak again, he was the one that said there were several lengths of throw out bearings.

The 4 cyl Iron duke is a GM motor and the SM465 is a GM transmission. He mentioned I could use the same stuff except the throw out bearing.

 

[TSB8C]

"The 4 cyl Iron duke is a GM motor"

Got myself mixed up while digging on their web site. Their part # TB1 is the adjustable bearing for GM engines.

 

[Super8mm]

"The 4 cyl Iron duke is a GM motor"

Got myself mixed up while digging on their web site. Their part # TB1 is the adjustable bearing for GM engines.

Thanks, it is easy to do, they have so much information on their site