My welding rig
Buuushman
Senior Jeeper
- Posts
- 632
- Thanks
- 0
- Location
- Kihei, Hawaii
- Vehicle(s)
- 77' CJ-5, 360 c.i. motor, T-176 trans, D-300 transfer case w\ twin sticks, Dana 30 front, A.M.C. 20 rear w/ 4.10's, solid axles & trac-lok, 2.5" lift Y.J. springs.
This is the mobile rig I built for my business. I started with an 81' C-20 pickup
that had sat in my buddy's yard for 7 years. Ground up resto done by me, all mechanical, body, paint and interior. Built the deck and rack also.
Equipment:
Hobart Champion 16 multiprocess welder with 8000 watt aux. generator.
Miller 180 autoset M.I.G. with spoolgun.
Argon, co2, & trimix onboard for stainless & aluminum in the field.
100' 220 extension cord for portability with M.I.G., on boats, in houses, etc.
Mini brake for sheetmetal work.
Enough tools to build a Jeep from scratch if I gotta.
I change stuff all the time, but for now, it works for me.
Bush
that had sat in my buddy's yard for 7 years. Ground up resto done by me, all mechanical, body, paint and interior. Built the deck and rack also.
Equipment:
Hobart Champion 16 multiprocess welder with 8000 watt aux. generator.
Miller 180 autoset M.I.G. with spoolgun.
Argon, co2, & trimix onboard for stainless & aluminum in the field.
100' 220 extension cord for portability with M.I.G., on boats, in houses, etc.
Mini brake for sheetmetal work.
Enough tools to build a Jeep from scratch if I gotta.
I change stuff all the time, but for now, it works for me.
Bush