home made twin stick wont go into low 2wd???
buzzinhalfdoz
Jeeper
- Posts
- 75
- Thanks
- 0
- Location
- east tn
- Vehicle(s)
- 1970 cj5 134-4cyl (tub off frame and back on, suspension done(2.5 " yj spring lift),assembling engine now) after engine goes in steering upgrade to saganaw.
i made shifters and linkage to hook up the transfer case as a twin stick, all fits well and all shifts if i use the 2wd to 4wd first then shift from high to low. but if i try to shift into low in 2wd it just wont move. is their some internal linkage that has to be modified???
thanks
thanks