Fuel sending unit
Cjman
Jeeper
My fuel gauge stopped working and I’m reading full open on my meter between the post in the sending unit to the ground lead. This is a relatively new sending unit but before I drop the tank (again) I want to have another unit in hand. Omix and Crown seem to be the most common suppliers. What have you folks used with good success. Any other suppliers?
Additionally, once I drop the tank, I’ll cut an access hole in the bed and make a cover panel so I can get to the sending unit easier in the future.
I’ll provide those measurements of where I cut to anybody if interested.
Thanks
G
Also...if I climb into the Jeep or bump it in any way, I hear the sending unit tapping/bouncing freely. Not sure that has always been the case.
Additionally, once I drop the tank, I’ll cut an access hole in the bed and make a cover panel so I can get to the sending unit easier in the future.
I’ll provide those measurements of where I cut to anybody if interested.
Thanks
G
Also...if I climb into the Jeep or bump it in any way, I hear the sending unit tapping/bouncing freely. Not sure that has always been the case.