Engine Best gasket for a water pump on a 258?

[Scout1067]

I recently switched out water pumps and now it is leaking from the gasket. I probably should not have used the one supplied with pump but now I get to replace it. What is the best gasket to go with? I am leaning toward fel-pro

Sent from my SM-A528B using Tapatalk

 

[j6824]

https://www.permatex.com/products/g...right-stuff-black-1-minute-gasket-maker-5-oz/

Use this on everything now (with the exception of LubeLockers for diff covers)

 

[TSB8C]

Fel-Pro for me for sure. I believe the 258 engine uses a # 13877. And for the sealant, I prefer the Permatex "Ultra Blue" for water or wet area gaskets.

 

[Armyvet25]

Over the years, I've used every type of sealant imaginable looking for that one perfect one, it always comes back to old school for me, I use whatever gasket, don't care, and a thin layer of permatex 2 or 2B gasket sealer on both sides(comes in a tube, sticky green ), never ever had a leak, and scrapes off with a putty knife or roloc wheel when replacement was needed. silicone always leaked for me, don't know why.