Engine Removing 304 tub off Bell housing question
FFEH
Jeeper
I am removing a 304 from a 1973 CJ5 tub off. I have never removed and engine from a manual transmission except for VW's. Could you remove the engine with bell housing attached and once it is up and out detach the bell housing to mount the engine on the stand. Than when it is time to install remount bell housing to make it easier to align components? I am having trouble visualizing the components in the bell housing. The PO told me that he installed a new clutch so I am also vacillating on the need to remove the engine for clutch inspection. I am also after reading the NOVAK The Novak Guide to Clutches, Linkages & Bellhousings for Jeep® Conversions article aware that I am out of my depth on all the measurements needed to make sure it is all correct. Thanks for your time and expertise.