cj7 first car
jeep cj7 304
Active Jeeper
i got my jeep as a project for me and my dad to work on when i was 13. first it started off that we were just gonna make it run and then begin to modify it but then we decided that we should just rip it apart. so we fully rebuilt the motor and threw together the amc 304 with new headers, cam, 4 barrel edelbrock performer intake manifold and edelbrock 650 carb. we took off all the emmisions junk and threw on what you could call an exhaust (two LOUD side mounted glasspacks). then we threw the motor in with a T-150 3 speed transmission and Dana 20 transfer with stock AMC20 and Dana 30 axles. i am just waiting til i snap those weak links before i replace them. i stripped out the old suspension and put on a 4 inch spring lift with 1 inch shackles and a 1 inch body lift, for a total of 6 inches. i then threw on some 36 inch super swamper tsl radials with a full size spare. I stripped out the nasty shag carpet and left it bare floor with some new racing style high back seats wiht 4 point harnesses. now i am beginning to work on the body so it can look as good as it performs.
now its time for pictures...
now its time for pictures...