source

  1. BajaEdition

    Up Grading that Yoke

    no not the jokes around here, your yokes. I always wanted to write this but I found a picture Cj had posted in his tech article about breaking loose yoke nuts and decided to just go for it here is the pic here is the article...
  2. S

    Source for Factory Frame Cover?

  3. S

    Source for Original Seats

  4. F

    Garnet Red Seat Source

  5. P

    Best source for original style wheels?

    I'd like to return my '74 cj6 to original style wheels... anybody have a favorite source for these?
  6. P

    Best source for original style wheels?

  7. O

    Source for 3/8" feed & 1/4" return fuel tank sending unit?

    I've got an 82 CJ7 and it's been V8 swapped by the PO. I'm now doing a Hamilton FI conversion and the instructions call for a 3/8" feed line and 1/4" return. My sending unit appears to have 1/4" ID feed & 3/16" ID return hard lines coming out of it, if I'm measuring correctly. I am assuming the...
  8. O

    Source for 3/8" feed & 1/4" return fuel tank sending unit?

  9. FiNorman

    Source for Laredo Wheels

  10. DaveMueller

    Steering shaft alignment, source for upper bearing

    Hi all, First the easy question - does anyone know a low cost upper bearing for a GM tilt column? I'm seeing prices around $50 for a single bearing which is unreal considering it's just a plastic race with 14 balls. Mine is about 1-1/4" inside the inner race and 1-1/2" outside the balls...
  11. JLCBikes

    Cj7 defroster cable, source

  12. C

    Spindle studs source?

    Opened up the front rotor to check the bearings and the spindle bearing. Appears the PO stripped out 3 of the 6 spindle studs that holds the spindle. Instead of replacing with new studs they used 1" 3/16 grade 8 bolts. To keep them from vibrating out (I'm assuming from this point) they taped 2...
  13. 4

    Fuel gauge signal wire source

    I've searched the site and the internet itself, and I can't find any source for the fuel gauge signal wire that runs from the center threaded post of a cj7 sending unit to the gauge itself. Anybody know where to find one or what obscure name it goes by? Thanks.
  14. ThisGuyUKnow

    Source for Blower Motor Resistor?

    I am having no luck online. I need a blower motor resistor for my 85 Cj. For some reason unknown to me the old one is just completely missing. I would like a new one but if anyone knows any other vehicles that use the same one I may have some luck at the pick and pull
  15. ThisGuyUKnow

    Does Anyone Know a Source for Good Factory Reproduction Interiors?

    Im looking to get back into the cj scene soon. Here is the thing. I have a particular cj in the works... (pics to come soon) I am thinking long term here but one thing I have always liked is the Laredo interior in the honey(spice,tanm whatever you wanna call it) with the silver strips...
  16. BrockGrimes

    Half Top Source

    Found these guys awhile back and forgot to toss up the link for those interested: YJ Half Hardtop Kit The YJ top says it'll work on CJ-7's. They also have CJ-8 Fulltops, halftop, bulkheads, and stuffs, for you lucky few.
  17. C

    Source of idle problems

    I think i've figured out what my idle problems are after putting in a new carb kit and it not taking care of the problem. The choke plate is not closing. Jeep runs fine if I hold the plate nearly closed. Is the choke controlled by a relay or another sensor or just 12v? I've read through a...
  18. C

    Source of idle problems

    I think i've figured out what my idle problems are after putting in a new carb kit and it not taking care of the problem. The choke plate is not closing. Jeep runs fine if I hold the plate nearly closed. Is the choke controlled by a relay or another sensor or just 12v? I've read through a...
  19. FiNorman

    Source for Tires and Wheels

    I am looking for tires and wheels for a rebuild... 85 cj 2.5 inch Old Man Emu lift and 1 inch body lift, I was thinking 31 or 33's... does anyone know of a good source for great pricing on packages. I saw someone posted very positive comments on Treadright, but they didn't have a...
  20. B

    Parts Source?

    Need some input on your favorite user friendly websites for ordering the simple parts like heater cables, switches and just your common parts, etc....Thanks
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks