ring

  1. V

    Circular ring in engine bay

    On the driver side of the fire wall, there is a circular metal ring. What goes in there? What is it for?
  2. JeeperChris

    Stock Ring and Pinion carrier question

    My 79 CJ5 has the original open 3:54 R+P gearing. Can this carrier accept larger ring gears like a 3:90 or 4:10? Or does it only accept the smaller ones? I don't know where the division line is on the stock parts. Thanks
  3. JeeperChris

    Stock Ring and Pinion carrier question

  4. Oldguyinajeep

    Flywheel ring gear and clutch replacement

    This is sort of a “lessons learned” note about my flywheel ring gear replacement, intended to help anyone embarking on this project in the future. A chance for rookies to perhaps learn from my mistakes, and for experienced others to feel really superior, or smile and think to themselves, “been...
  5. Oldguyinajeep

    Flywheel ring gear and clutch replacement

  6. Masscj7

    Dana 30 ball joint split ring

    Has anyone found a quality tool for removing these when really rusted up? The Crown and Omix ones get lousy reviews. And mine a frozen up good. Sent from my iPhone using Tapatalk
  7. R

    "thick" ring gear

    First time poster. Does a "thick" ring gear (as the Nitro Gears D44-411T-NG) replaces the need to replace the carrier when changing gear set to a 410 ?
  8. R

    "thick" ring gear

  9. Hedgehog

    Ring and Pinion, to reset, remove or guess

    Down in the "What did you do with your CJ" thread there is an interesting and running discussion about an obviously loosely fit ring and pinion. The discussion really SHOULD have a thread all it's own. So, I'm inviting Woolly, Lumpy and the gang to bring their wisdom and photographs here for a...
  10. Hedgehog

    Ring and Pinion, to reset, remove or guess

    Down in the "What did you do with your CJ" thread there is an interesting and running discussion about an obviously loosely fit ring and pinion. The discussion really SHOULD have a thread all it's own. So, I'm inviting Woolly, Lumpy and the gang to bring their wisdom and photographs here for a...
  11. S

    Ring gear - pitting / porosity??

    I took my AMC 20 rear end out to swap the axles to one piece units and while looking at the gears I noticed something off on some of the teeth (see pictures). A couple of the teeth appear to be pitted. Is this okay? Are the gears still usable like this?
  12. S

    Ring gear - pitting / porosity??

    I took my AMC 20 rear end out to swap the axles to one piece units and while looking at the gears I noticed something off on some of the teeth (see pictures). A couple of the teeth appear to be pitted. Is this okay? Are the gears still usable like this?
  13. mopar440cu

    Good Snap ring Plylars

    Anyone have a suggestion on a good quality snap ring plylars that open wide for transmission work on bearing retainers?:D
  14. B

    Looking for ring and pinion kit.

    I'm looking for affordable 4.88 ring and pinion kit for Dana 30 front and dana44 rear in my CJ how do I know I'm buying what all is needed and where is a good source to purchase this ? Thanks guys
  15. B

    Looking for ring and pinion kit.

    I'm looking for affordable 4.88 ring and pinion kit for Dana 30 front and dana44 rear in my CJ how do I know I'm buying what all is needed and where is a good source to purchase this ? Thanks guys
  16. Neuner

    Front Axle Snap Ring

    PO left out way too many parts when re-building my Jeep. Went to look at the front wheel bearings and found that the axle snap ring has been missing. How badly is this part needed? I can't find it at any local store and don't want to pay $6 to have it shipped.
  17. Neuner

    Front Axle Snap Ring

    PO left out way too many parts when re-building my Jeep. Went to look at the front wheel bearings and found that the axle snap ring has been missing. How badly is this part needed? I can't find it at any local store and don't want to pay $6 to have it shipped.
  18. M

    ring and pinion exploded

    Hi everyone, what an awesome forum. Lots of useful tips here. Anyway, last year I bought my first jeep, a 79 cj7 renegade with a 360 in it. I bought it to have some fun and also to learn about vehicles. Last fall I was driving it and there was an aweful grinding towards the front. Pulled over...
  19. M

    ring and pinion exploded

    Hi everyone, what an awesome forum. Lots of useful tips here. Anyway, last year I bought my first jeep, a 79 cj7 renegade with a 360 in it. I bought it to have some fun and also to learn about vehicles. Last fall I was driving it and there was an aweful grinding towards the front. Pulled over...
  20. J

    snap ring trick?

    I am rebuilding my t176 and have gotten it all back together but the snap rings that go on the shaft to locate the front and rear bearings are kicking my butt for 2 days now. Since they do not have holes I cannot use my snap ring pliers and my drill blew up on me. Does anyone have a trick to...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks