oem

  1. R

    Misc. Oem Seats fabric black denim

    Hi, Does anyone know a place that sells the OEM Black denim fabric that is correct? is this right? (Link)-> Black Denim Upholstery Material -< I took some OEM seats to an upholsterer today and he said he was not sure where to get the Black denim. i think they are in pretty good shape for...
  2. CJ

    Installation Instructions WB-PEMBSC-FBK WB-PEMBSC-FNK WipeBoy OEM Style Windshield Wiper

    Installation Instructions WB-PEMBSC-FBK WB-PEMBSC-FNK WipeBoy OEM Style Windshield Wiper
  3. M

    oem radiator for 76 CJ7 304

    who sells the best oem radiator for 76 CJ7 304, auto,, or is it best just to recore my original , thanks greg
  4. Grumpa

    Electric or OEM fan?

    Which do you run and which would you suggest? Just wondering. Trying to make a decision which way to go with my "new" CJ5. My first Jeep had an anemic elect. fan with a switch to turn it off when fording. Vote and explain if you care too. Thanks!
  5. YJeXtreme

    OEM 82+ Center Cap Questions

    So I have a set of factory chrome center caps I’ve been saving with plans to mount them on my 84 CJ7 Renegade when I bought new wheels. I do have one original 15x7 white wagon wheel, but just noticedthere is a small gap between the cutouts for the lugs & the center bore edge of the wheel... Is...
  6. J

    OEM Steering arm lower coupler and new gear box

    Hey folks, I'm working on replacing my power steering pump and gear box and have run into a snag. The gear box I purchased doesn't appear to be compatible with the lower steering shaft coupling (OEM). The specs for the gear box are below: Input shaft spline count: 31 + Flat & Notch Input...
  7. J

    OEM tachometer 85cj7 wiring

    I'm starting to go crazy and feeling stupid. I removed my dash and am putting it back together. Everything is working good but I dont remember how the tach hooked up. Ive seen many diagrams online but dont seem to help. Are there any pictures out there of behind the dash? Thanks
  8. J

    Need new wiper arms: OEM or repop?

  9. manitou

    20 gallon gas tank (oem or aftermarket??)

    Currently, I have a 20 gallon gas tank on my 1983 CJ5. I always though that ALL CJ5's had factory 15-gal. tanks...until I started researching for a replacement. It's my understanding that there are two 20-gal. options: 1) replaces oem 15-gal. 1) replaces oem 20-gal. I just need to know which...
  10. S

    Whitco OEM Top

  11. Y

    OEM hood latch latches or hood pins opinion

    Have a fiberglass hood and no hood latch, just the side latches. They have always scared me a bit as they just don't seem too solid. So found these hood lock pins. Then would leave the OEM latches for looks. https://www.polyperformance.com/exterior/body-fender-hardware/hood-pins Or fab a...
  12. P

    OEM Gauges, worth the money?

    I found new OEM water and fuel gauges made by Stewart Warner but they are way expensive, 250.00 bucks. I'm thinking that is way over priced but I do not want to put :dung: gauges back in it. What do you guys think, buy em or pass. My CJ is getting a full frame off restoration when I retire in 4...
  13. Y

    OEM gauge connnector

    Anyone know where to get the connector for the gauges?
  14. sponge

    steering shot - "upgrade" vs OEM advice

    So the steering assembly and box are shot. I have a heavy duty box bracket already from a deal years gone by. In an effort to not spend money for the sake of spending money. What is worth the upgrade and what is a waste because it all is pretty cheap... Jeep has a 4" lift and 33x12.50 tires...
  15. FiNorman

    Reupholstering OEM seats vs new aftermarket

    I know I could easily buy aftermarket seats, but we really haven't found any we love in a two tone pattern with the vertical stripes in a color scheme that would go with the Ford Impact Blue we plan to paint the jeep in. My plan is to find some original seats that are structurally sound, redo...
  16. 007

    OEM Seat Bolts

    Before I go tearing into replacing my original seats with different original seats, can anyone tell me if those are normal bolts or hex head screws that hold the seats to the frame? Sent from my iPhone using Tapatalk
  17. driver007

    OEM tires

    What tires came on a 1976 cj5 from the factory?
  18. C

    Can a OEM tach become bad?

    I have a '83 that has a OEM tach needle that bounces between 500 and 1000 rpms. I guess its in the ballpark but this is unacceptable. I thought I found a helpful search page only to later see it was for an ebayer trying to sell his used cj7 tach...saying "they don't last forever". So with my...
  19. Peanut Butter

    Gearing - Not OEM?

    Got my front differential apart and cleaned up so that I could replace the inner axle seals. Looked at the gears to figure the gearing ratio to see if it matched the tab that was bolted to the differential. Tab said 3:54. Gears are 46 x 13. Which is 3:54. My question is according to CJ's...
  20. Peanut Butter

    Gearing - Not OEM?

    Got my front differential apart and cleaned up so that I could replace the inner axle seals. Looked at the gears to figure the gearing ratio to see if it matched the tab that was bolted to the differential. Tab said 3:54. Gears are 46 x 13. Which is 3:54. My question is according to CJ's...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks