knuckle

  1. JeeperChris

    2 Bolt or 6 Bolt steering knuckle?

    I'm buying some new front rotors for the '79 CJ5 and the site is asking if I have 2 Bolt steering knuckle or a 6 Bolt. I think it's a 2, but what am I looking for? Anyone know for sure? Thanks
  2. H

    Dana44 knuckle

    Hey friends, does anyone know if Dana 44 knuckles will fit on a Dana 30 axle? I broke my passenger side knuckle last weekend and it seems I can only find driver side knuckles for the 30. But I’ve seen some 44 knuckles advertised that they’d fit on a 30.
  3. jzak

    Wagoneer?

    Hey Guy, I know this is not exactly a CJ topic, but I figured maybe some of you may have experience in other jeeps. So I always thought about maybe buying an old Grand Wagoneer, but with the value skyrocketing I figured i was priced out of the market. A couple days ago, I found this craigslist...
  4. Masscj7

    Dana 30 ball joints knuckle rebuild

    So after to evenings finally broke the ball joint buts loose. Now my question is do the split ring threaded ball joint inserts need to be loosened or removed before the ball joints will drop free? Been using a BFH and no luck. Follow up, would be, and tricks to getting those split rings out...
  5. Masscj7

    Dana 30 ball joints knuckle rebuild

  6. SlightlyBurntOut

    Closed knuckle Dana seals

    Good evening Gentlemen Im new here so be easy on me. I am a 3rd generation die-hard Jeep lover that has just recently entered the world of CJ-5’s when I recently acquired a 1965 model, F-4 and 3 speed trans. I am planning a restoration to make it look as factory and stock as possible within...
  7. SlightlyBurntOut

    Closed knuckle Dana seals

  8. S

    Steering knuckle identification?

    I am starting to think about going high steer on my jeep. I know there tons of info on what parts to use. My problem is i don't know what i already have on this Frankenstein of an axle, i did not build it. How ever this is what I know its a dana 44 from a wagoneer, cut down to wide track width...
  9. Jeep on Mars

    Cracked passenger steering knuckle

    Looking for some help finding a steering knuckle. After some suspension work, I noted a crack on the end of my passenger-side steering knuckle, specifically the end nearest the drag-link-to-steering-knuckle hole. Searching around for a new passenger side steering knuckle for my rig is proving...
  10. R

    Dana 27 closed steering knuckle

    I just have a quick question, how do you lubricate a Dana 27 closed steering knuckle? And what type of lubricant should I use? Thank you!
  11. R

    Dana 27 closed steering knuckle

    I just have a quick question, how do you lubricate a Dana 27 closed steering knuckle? And what type of lubricant should I use? Thank you!
  12. billyballer

    Stock Knuckle castings

    Hey guys, I have an '86 CJ7 with stock Dana 30 front axle. I decided awhile ago I wanted to re-gear from the stock fuel economy gears to 4.11's and add some traction while I was at it so I bought a second set of wide track axles (amc 20 and dana 30) and built them so I could just do a simple...
  13. B

    dana 27 knuckle lube???

    in the process of rebuilding the dana front axel in my 1970 cj5. had to replace the knuckle bearings and hub bearings, got assembly complete yesterday. during assembly i packed all bearings with wheel brg grease( that is what was in their when i tore down). when finished i saw the plug on the...
  14. B

    dana 27 knuckle lube???

    in the process of rebuilding the dana front axel in my 1970 cj5. had to replace the knuckle bearings and hub bearings, got assembly complete yesterday. during assembly i packed all bearings with wheel brg grease( that is what was in their when i tore down). when finished i saw the plug on the...
  15. B

    dana 27 2 hole knuckle ???

    i am converting my ross to saganaw steering and need to know where to find a pas side 2-hole knuckle??? thanks
  16. B

    dana 27 2 hole knuckle ???

    i am converting my ross to saganaw steering and need to know where to find a pas side 2-hole knuckle??? thanks
  17. 1955jeepwillys

    Looking for outer knuckle for Cj Dana 30

    Hi all I am looking for a drivers outside knuckle for a Cj Dana 30. All of the bolts that hold the locking hub snapped off inside and I can't drill them out. Does anyone have one taking up room in your garage or on the side of your house? The axle came out of a 1985 jeep cj7. Any help would b...
  18. 1955jeepwillys

    Looking for outer knuckle for Cj Dana 30

    Hi all I am looking for a drivers outside knuckle for a Cj Dana 30. All of the bolts that hold the locking hub snapped off inside and I can't drill them out. Does anyone have one taking up room in your garage or on the side of your house? The axle came out of a 1985 jeep cj7. Any help would b...
  19. B

    universal joints wont pass through steering knuckle

    I replaced the original u-joints on my dana 30 axle with new ones from Auto Zone-Duralast brand. When I tried to re-install the axle spindles, the u-joint caps wont pass through the steering knuckle. Is it safe to grind down the inner edge of the knucle enough to let them pass through or is...
  20. B

    universal joints wont pass through steering knuckle

    I replaced the original u-joints on my dana 30 axle with new ones from Auto Zone-Duralast brand. When I tried to re-install the axle spindles, the u-joint caps wont pass through the steering knuckle. Is it safe to grind down the inner edge of the knucle enough to let them pass through or is...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks