handle

  1. Bog Rat

    Steering Need Help Choosing A Suitable Steering Set Up

    Hey guys, I'm new to this forum, but many years ago I had a membership over at jeep-forum.com where I was hoping to make a build thread for the Bog Rat when I first set out on the painful journey of CJ ownership. Anyway, I've finally been able to afford a full custom trail rig build, and I have...
  2. CJ

    Easy Way to Remove a Yoke Nut.

    At one time or another - most of us will get to the point where we have to remove the yoke from a differential or transmission. It's pretty easy to break the nut loose if the trans can be put in gear or if the differential is still in the vehicle. What do you do if you don't have an air wrench...
  3. G

    Grab handle for CJ's???

  4. M

    Parking Brake Handle Retainer

  5. D

    75 CJ parking brake handle

  6. Posi

    Kidde Recalls Fire Extinguishers with Plastic Handle

    I have a total of 8-10 fire extinguishers located in my house, shop, garage, and Jeep all have metal handles except 2. The one I carry in my 71 CJ has been recalled. A new replacement is on its way. If you haven't already you may want to check yours...
  7. V

    1977 CJ7 hardtop door handle lock removal

    How do you remove the door lock cylinder on a 1977 CJ7 hardtop door w/wo the key. I am baffled.:confused:
  8. V

    1977 CJ7 hardtop door handle lock removal

    Does anyone know how to remove the lock cylinder from a 1977 CJ7 hardtop steel door w/wo the key. I am baffled.
  9. G

    XJ parking brake handle in your CJ?

    Hi all. I recently picked up a parking brake handle from an XJ to use in my CJ. I want to replace my pedal style one so that I can install a cage later and still have access to it. Has anyone else done this? The cable that came with the handle looks long enough, but I was wondering if there...
  10. Fastatv

    What about your nickname?

    I see many different nick names here on the site and I'm curious how folks got these names. There may already be a thread on this but I couldn't find it. My nick name ( handle ) is Fastatv. Many years ago I use to drag race ( ride ) a Yamaha Banhsee. One day at the dirt drag strip, I was...
  11. ThisGuyUKnow

    Hardtop Lift Gat Handle

    I got a wooden frame a guy built for practically free that is meant to mimick the hard top storage dollys you see on Quadratec for like 150 bucks. His was for a tj and since it isnt metal tubing, the lift gate handle is in the way to set the top on the rig. How hard is it to remove/reinstall...
  12. E

    How to handle CJ5 frame and tub rust - pics

    I'm a complete newbie and probably paid too much :censored: for a CJ with frame rust. It also has some rust under the tub and I should've been clued in by the extensive diamond plating. That being said--I'm wondering how to handle the frame rust. It looks like someone already welded on...
  13. OEM1984CJ7

    Anyone have D300 long shifter handle?

    Looking for a photo of the dana 300 with the LONG shifter handle. I found one but wondering what it actually looks like installed. thanks.
  14. OEM1984CJ7

    Anyone have D300 long shifter handle?

    Looking for a photo of the dana 300 with the LONG shifter handle. I found one but wondering what it actually looks like installed. thanks.
  15. sky578

    Door handle dilemma

    Here's my problem for today :mad:
  16. N

    cj7 exterior door handle

    i am currently restoring a 1983 cj7. when i got the truck most of the parts were in boxes, and i dont have too much experience with jeeps. but anyways my question is about installing the exterior door handles. i understand they use shims and pins to be held in place, but i cant get them to stay...
  17. N

    Soft door handle setup

    Hi, I just bought a used set of soft doors for my 77 CJ-7. They shipped with the handles removed and I'm having trouble getting them set up just right. Anybody willing to post a photo or two to give me an idea how they go together. I have the twist type or slap doors as I have heard them...
  18. M

    Best way to handle Frame Rot

    OK here's the deal...I have recently purchased a 73 CJ5 304V8. Naturally the Frame has some pretty bad rust rot goin on under the rear shackle mounts. MOOG sells the pre-made caps that you weld on but I was told it was better to go with metal strap and 3X2 angle iron. Any thoughts or experience...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks