gears

  1. poppatello

    Misc. Cj Gears, One Piece Axles, Auto Locker

    Just like the title, I need to upgrade to 4:56 gears, carrier, one piece rear axles, and want to keep an auto locker in the front but need one that fits 4:56 gears. I currently have 3:55 and an Aussie auto locker. Even willing to trade the locker for a locker. Figure I would see if someone has...
  2. poppatello

    Diff Regear and One Piece Axle Brands.

    Hello folks. It's been a long time since I've been on and I have neglected the Cj long enough. I need to regear to 4:56 or 4:88 but leaning heavenly towards 4:56 and I need to replace the two piece axles. So what brands are the go to? I want something strong and reliable but doesn't need to be...
  3. Manic Mechanic

    Trans Need transmission help (T176)

    i need some help getting a t176 trans into neutral as i am out of my element as i dont do trany work other then removing and reinstalling them. so long story short i had to pull the engine and trany on a POS 5 due the engine being locked up. in the process i had to remove the top cover on the...
  4. L

    Suspension CJ8 lift

    I have a CJ8 I just picked up. I am going to do a spring over on top of f250 axles. I just found some I can pick up with 4.30 gears for a good price. My question is what springs would everyone run for a decent ride. Mostly just a trail truck at the deer lease. But an occasional run to the beach...
  5. P

    Re-gear 1979 CJ5

    Previous owner installed 2” lift, 33” tires, swapped factory 3 spd tranny for a 4 spd T-18 & rebuilt original 304 V8. They left the original 2.73:1 gears in the AMC 20 rear and Dana 30 front ends. I‘m thinking about re-gearing to 4.10 ... still a newbie so would welcome input, suggestions on...
  6. B

    Carrier Size for lower gears

    Hey, I have an 86' CJ7 and would like to put lower gears in both differentials, Dana44 & Dana30. They are geared at 2.72 now. I would like to install 4.10 Will 4.10 fit the existing carrier or do I have to change them also? Any help would be great. Thanks
  7. KeithMcKalister

    Ford T18 gears in Cj T18

    Can it be done? I have found a Ford T18 for $100. I have a Close ratio 4.02:1 1st and would like the 6.32:1. I am aiming for a really low 1st year for crawling. I don't want to switch over to a Dana 300 to get the extra 4.0:1 vs the Dana 20 3.15:1. The cost of the Dana 300, adapter plate and...
  8. KeithMcKalister

    Ford T18 gears in Cj T18

  9. Postal13

    Front and rear gears 85 cj

    ISO 3:37 or 4:10 Gears for my 85 CJ 7, I have not figured out how to post in the want adds so any help would be great.
  10. Postal13

    Front and rear gears 85 cj

  11. C

    1985 cJ7 t5 woes 2nd. And 4th gears noises and more please help

    Hi I have been having trouble recently with a noisy gear box Sounds like a high speed grind in 4th gear when I hit a bump in the road And second gear gets the same sound if I pull her into gear alittle but harder Then normal, The newest development is now something sounds like when I let off on...
  12. C

    1985 cJ7 t5 woes 2nd. And 4th gears noises and more please help

  13. A

    72 Jeep 304 V8 oil pump gears

    anyone know what the dimples mean on my water pump impellers? do they have to line up or be on the same side? just want to make sure i put it together right
  14. A

    72 Jeep 304 V8 oil pump gears

  15. C

    Gears and axles

    So I now have the funds to change the gearing and do some lockers. I have the D30 up front and AMC20 in the back. Both gears are currently 3.31. I want to go to 4.10 with the auburn ECTED electric lockers along with 1 piece axles in the back. Any recommended brands or kits for the axles? I have...
  16. C

    Gears and axles

  17. coldair

    What brand gears would you run and why?

    Looking at gearing my jeep down what brand gears do you guys recommend and why? I'm looking at a set of yukons right now
  18. coldair

    What brand gears would you run and why?

    Looking at gearing my jeep down what brand gears do you guys recommend and why? I'm looking at a set of yukons right now
  19. H

    popping out of 2nd and 3rd gears

    It appears both my 2nd and 3rd gear synchronizer rings are are bad. When I try to shift into either gear at idle, the gears chatter and do not fully engage, and as I increase the engine speed they pop out. I took the top of the transmission off and was able to slide the synchronizer sleeve into...
  20. H

    popping out of 2nd and 3rd gears

    It appears both my 2nd and 3rd gear synchronizer rings are are bad. When I try to shift into either gear at idle, the gears chatter and do not fully engage, and as I increase the engine speed they pop out. I took the top of the transmission off and was able to slide the synchronizer sleeve into...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks