flex

  1. A

    Suspension Bump Stop Selection

    Hey all, On a recent trip to Moab I taco'd my front driveshaft on Poison Spider (jeep flexed and the driveshaft went right up against the bellhousing). I have a BDS 4" lift and at the time had my sway bar disconnected. I am running some cheapy amazon universal bump stops that clearly are not...
  2. M

    Tera flex 4:1 low gear set

    Hello, I am changing out my transmission to a Sm465 and keeping the Dana 300 transfer case. I am looking to rebuild the Dana 300 and looking to purchase the 4:1 low gear set. Is it worth it or overkill for my project 86 Cj7 jeep.
  3. M

    Tera flex 4:1 low gear set

  4. Hedgehog

    T-18a or any rebuild kit and Terra Flex?

    I'm specifically looking for a rebuild kit for a T-18a, but to make this actually not about me, this could be about any American make transmission. Is there a company that produces a superior kit to the others. I prefer American made if it is at all possible. Here he goes making this about...
  5. Hedgehog

    T-18a or any rebuild kit and Terra Flex?

    I'm specifically looking for a rebuild kit for a T-18a, but to make this actually not about me, this could be about any American make transmission. Is there a company that produces a superior kit to the others. I prefer American made if it is at all possible. Here he goes making this about...
  6. J

    Frame flex and front end shaking '64 CJ6

    Hello. I'm new to the CJ5/6 world. My 1964 CJ6 when I'm driving 40mph+ shakes from side to side in the front end. Also, the steering wheel shakes intermittently. I figured this could be a number of things such as all of the steering linkage needing to be rebuilt, could be tires, and could be...
  7. Germy

    Flex fan

    This thing is obnoxious. It is loud then it's gets louder the faster it moves. Any quieter alternatives? Sent from my iPad using Tapatalk HD
  8. Germy

    Flex fan

    This thing is obnoxious. It is loud then it's gets louder the faster it moves. Any quieter alternatives? Sent from my iPad using Tapatalk HD
  9. R

    Steering wandering & Frame flex?

    I have been trying to correct the wandering in the steering of my '69 CJ5. Has sag power steering with '78 CJ7 column. I have went back to the stock shackles, installed caster (started with zero shims but now have +6 degrees), corrected the camber, adjusted steering gearbox and checked for...
  10. jeeper1

    front brake flex line

    i'm currently redoing the brake lines on my '75 cj-5 and have everything just about done.but i'm having a problem getting the new flex line to thread into the backing plate on the driver side.the new line on the passenger side threaded on fine,but the driver side just keeps turning and won't...
  11. M

    4.0 EFI Flex Plate to TH400

    Has anyone modified a 4.0 EFI window ring flex plate to bolt up to a GM th400 or TH350 3 or 6 Bolt torque converter? I would love to drill a hole and mount a sensor then to bend over and pay 350 to 500 for a conversion?
  12. M

    4.0 EFI Flex Plate to TH400

    Has anyone modified a 4.0 EFI window ring flex plate to bolt up to a GM th400 or TH350 3 or 6 Bolt torque converter? I would love to drill a hole and mount a sensor then to bend over and pay 350 to 500 for a conversion?
  13. C

    Flex OIIIO

    So i have always wondered do you really need a Spring Over Axle lifts to get the flex on your front and rear end? Great example is a Spring Under man "Old Dog" and im hoping he will give me his advice on this. When i get going on the 77 CJ7 the biggest thing i want is to have that bad a** flex...
  14. Thorwon

    heater duct flex hose

    I've got a 74 CJ5 that the defroster and fresh air hoses are beyond help. Does anybody know where I can get the flex hoses to hookup my defroster and the fresh air intake for my heater? I can find the hoses for 76 and up but not for my 74.
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks