coupler

  1. J

    OEM Steering arm lower coupler and new gear box

    Hey folks, I'm working on replacing my power steering pump and gear box and have run into a snag. The gear box I purchased doesn't appear to be compatible with the lower steering shaft coupling (OEM). The specs for the gear box are below: Input shaft spline count: 31 + Flat & Notch Input...
  2. nlcj

    Upside down steering shaft and bell coupler size

    Hi all, The PO put my steering shaft in upside down for some reason so theres a rag joint going into the box and the bell coupler is up on the steering column side. the coupler is shot and I want to replace it but cant find the right one. the ID of the old coupler is 1". Any ideas on what...
  3. Neuner

    U-Joint Style Steering Coupler

    After investigating some minor free play in my steering, I found the OEM Steering Coupler connection to be the culprit. I really don't want to replace it with the same or buy a Borgenson Shaft. I would like to find just a U-joint coupler? Thought I found one for around $70 but lost it. Also...
  4. My79CJ7

    Column Bearing and Steering Shaft Coupler

    First Post, go easy virgin jeep owner/mechanic. As the new owner of a 79 CJ 7, I knew there was going to be work that needed to be done to this relic. I've been researching and trying to find a video or step by step instructions on how to replace my column bearing and steering shaft coupler...
  5. V

    Coupler Steering

    ? for anyone. I'm wanting to make sure that I'm ordering the right part. I have a 73 cj 5, that had a power steering setup done on it with a chevy steering column. The column was toast so I pulled it and replaced it with the factory standard column and shaft. If I'm ordering a coupler to put...
  6. V

    Steering ?

    Ok my problem is I had to get a steering shaft for my 73 cj 5, b/c i wanted to go back with an original. But there is alot of play with the shaft that goes into the steering box. Is there a bushing that I can get to put on the end that goes into the steering box? Or any other advice. Also I...
  7. H

    hello and help with a coupler change

    This is my first post and hello from central IL. Now for the question, I have a 1972 cj5 with manual steering. The steering coupler was in pieces when I got it and I now have the replacement parts. The old one is off. The shaft is still on the jeep. How do I get the boot on the shaft? Does...
  8. G

    Power steering shaft coupler

    I have a 304 with power steering. Anyway while attempting to move my cj with no engine the lower shaft coupler came apart. Here are the parts... 18018.06 - Power Steering Shaft Coupler Kit For 1976-86 Jeep CJ | Discount Jeep Parts Seems like the spring came out. Any detailed pictures on putting...
  9. L

    Speedometer gear coupler 84 Cj-7

    When my speedo cable went it took out the coupler that fits inside the cable end of the speedometer gear. Got the replacement speedo gear but need this little coupler do-hickey that's sheared. Any ideas on where to get one please.
  10. L

    Speedometer gear coupler 84 Cj-7

    When my speedo cable went it took out the coupler that fits inside the cable end of the speedometer gear. Got the replacement speedo gear but need this little coupler do-hickey that's sheared. Any ideas on where to get one please.
  11. D

    Steering coupler question

    Could someone tell me if the bearings in the coupler go bad or the whole housing and bearings. Also, should the steering shaft be tight in the coupler?? refer to pic TIA. trying to save some money in these hard times :(
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks