bushings

  1. H

    Suspension 1985 CJ Laredo Suspension Question

    Hey guys, I'm looking to renew my 75/K stock Laredo suspension with new leaf bushings, sway bar bushings, pitman arm, steering arm, tie rods, etc. Can anyone suggest a kit or is there a list that I can go by for everything? Which company is better or not? I've always used Moog on my old car...
  2. B

    Body OMIX Body Mount Kit failure

    I bought the OMIX body mount kit from Summit Racing for my 1972 CJ5 and all the bushings separated and failed in less than 6 months! I’ll get my my money back, but at this point I don’t want to risk installing another set of OMIX. What are some other good brands and model numbers of body mount...
  3. CCKCJ785

    Help Changing body mounts on 85CJ7

    I am changing out my body mounts on 85CJ7. Have not attacked it yet. Can anyone give me a list of the bolt hardware I will need. Want to get it on the front side of the project. Also is it worth the cost of the conical SS washers in this upgrade? Bolts and specs, qty are my critical ask. Thanks
  4. CCKCJ785

    Lift Kits Leaf Spring Removal

    Updating my springs on 85 CJ7. How the heck do I get the bolt out of the- spring? I am up for any suggestions. Pic attached, I suspect they have been in there since 85. Thanks
  5. Ultrunner

    Help YJ to CJ body mounts

    Question for those who have done the YJ to CJ tub swap. What body mount bushings do I need? Is there a difference between the CJ and YJ bushings and bolts or are they the same? Thanks in advance. Sent from my iPhone using Tapatalk
  6. CJ

    Remove those stubborn old shackle bushings.

    I found myself in the same predicament that many early CJ owners find them selves in. How do I remove the factory type steel sleeve shackle bushings from the frame perches if they are somewhat welded to the frame from years of use? What you will need is a hack saw and a fine pitch blade...
  7. T

    Replacing leaf spring and shackle bushings ?

    I have a 4 inch Rough Country lift on my 80 cj 7 installed by p.o. Are the spring bushings and shackle bushings o.e.m. size ? The front shackle bracket looks tilted to me also . Is this normal ? Sent from my SM-G920V using Tapatalk
  8. F

    Body Mount Bushings

  9. L

    torque arm bushings w/pictures!

    Replacing the bushings while I've got it apart. I don't think the op had them installed correctly - now trying to figure out what's right. I did a search and believe I am close to having it correct, but it just doesn't look right to me... First picture has the outside bushing with the smaller...
  10. L

    torque arm bushings w/pictures!

  11. L

    leaf spring bushings

    As some may know, I am rebuilding the front suspension, 4" lift, etc. Today I started installing the front springs and noticed that the rear poly bushings were not symmetric, as in, one of the bushing halves had a wider 'lip' than the other one. In other words, swapping one for the other will...
  12. Tremelune

    Shackle replacement for a 2.5" lift?

    I have an '83 CJ7 with some janky shackles and bushings. I don't want to spend money on upgrades until I've done some sortin', so I'm looking to replace these shackles with something on the cheap side just to keep the car safely driving straightish down the road. My car has a 2.5" Rancho spring...
  13. Dep

    CJ/YJ spring bushings

    Hey everyone. I need some help on spring bushings. The daystar bushing kit has 2 different ones in the kit. one has a 1/4" shoulder lip, the other has a 1/2" lip. These are for the main spring eyes. Do i use one of each on each or are they front /rear specific? thanks...
  14. verreaul

    Spring Hanger ID Tolerance for Bushings

    I am replacing the worn out shackles/bolts and bushings on my jeep and I noticed the spring hangers ID is a little more than 1" they are a little less than 1 1/32" so the bushings are not very snug (I can spin them easily). I know I should probably replace the hangers but I am a little...
  15. R

    Rear bushings on leaf spring replacement

    Hi all- I'm very new to all of this and I am eager to learn about my Jeep and how to better maintain it. I realized my rear bushings on the driver side are ripped and the shackles are coming apart because of it. My question is, should I replace both rear bushings or just the damaged one? I...
  16. T

    shackles

    Bought my 79 cj5 a few months ago. been working mainly on engine. runs sweet now. Saw a little negativity towards shackle lift on this site. Mine came with a shackle lift and does wander. was hoping new bushings would help. Any thoughts to send me down the right track?
  17. G

    tf999 shift linkage bushings

    I need to replace the bushings on the bell crank shaft but can not find anyone selling them. Can someone tell me where I can get them.
  18. G

    tf999 shift linkage bushings

    I need to replace the bushings on the bell crank shaft but can not find anyone selling them. Can someone tell me where I can get them.
  19. I

    Replacement spring bushings

    I'm replacing my bushings on the 6 with new urethane ones that I brought from 4wd.com. The issue I have is only 2 out of the 3 bushings per side has a metal sleeve through the middle. Any ideas on why the kit only has 2 metal sleeves. Both kits ( brought 2) are the same. Any guidance appreciated.
  20. T

    Replacing body mount bushings

    It's time to move on to the next project on the never ending list of things to do to a CJ. Looking for advice on body mounts bushings, best kind to go back with and best way to change them.
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks