Power steering pump studs
newun
Jeeper
I bought a replacement power steering pump for my 85 CJ7 (2.5L engine) and in a moment of stupidity took back the old one for core refund before installing the new one. Turns out the studs on the back of the new pump are too short to go through the mounting bracket, and the store already shipped the old one off!
The new pump appears to have M10x1.5 metric studs, and since the original nuts thread onto it I assume the original pump had the same. I'd need at least an inch of thread to get the stud through the bracket and put a nut on it. Anyone got a source for these, or a part number? I checked the Pick-and-Pull but all the pumps there had too-short studs for my bracket.
The new pump appears to have M10x1.5 metric studs, and since the original nuts thread onto it I assume the original pump had the same. I'd need at least an inch of thread to get the stud through the bracket and put a nut on it. Anyone got a source for these, or a part number? I checked the Pick-and-Pull but all the pumps there had too-short studs for my bracket.