picked up a RUST Bucket

[fishinfool98]

picked up a 81 CJ8 for a parts jeep, 200
going to junk the frame, tub, axels, hood, and a few other things if anyone needs anything let me know

Oh by the way

Its in ALASKA!

getting a good hard top out of it, seats, dash
gonna get the out and have some fun tearing this thing apart
:booze:anyone that wants to come help! come on up

 

[LuvMyJeep]

Ah, too bad I'm leaving AK... You guys have a lot of Jeeps in Homer? I'm up in Fairbanks.... not too many up here.

 

[fishinfool98]

how long since you have been in homer?
where you heading when you leave ak?

 

[CJ]

picked up a 81 CJ8 for a parts jeep, 200
going to junk the frame, tub, axels, hood, and a few other things if anyone needs anything let me know

Oh by the way

Its in ALASKA!

getting a good hard top out of it, seats, dash
gonna get the out and have some fun tearing this thing apart
:booze:anyone that wants to come help! come on up

$200? WOW - How much o ship to South GA?

AK is just a bit out of my driving range...

 

[fishinfool98]

not even worth the time to get it to the dump!
unless you really need the parts i can cut it up in little peices and send it bit by bit

 

[CJ]

not even worth the time to get it to the dump!
unless you really need the parts i can cut it up in little peices and send it bit by bit

Do I need to send two books of stamps or would three be better?

 

[fishinfool98]

4 books and lots of manilla envelopes

 

[fishinfool98]

got the jeep taken apart
good seats, top is in perfect condition, heater, wiring harness, dash,
and Tilt wheel
now to get rid of this

 

[CJ]

With as much rust as this thing has on it, why not just fire up the leaf blower and 'poof' it to the end of the property?

 

[mylittlecj5]

How much for the tilt wheel shipped to 74502?

 

[jeep cj7 304]

heaters are nice. I fixed mine earlier today, it's alot better for the passenger when theyre not standing in coolant.

 

[fishinfool98]

How much for the tilt wheel shipped to 74502?

:laugh: NFS
it was worth a try though

 

[sjbrand99]

Hey fishinfool, just thought I would ask, but what are you doing with the parts you removed? Are you using them as spares on a vehicle that is currently being restored?

If so any pictures/build updates would be good to hear.

 

[fishinfool98]

Im building a cj 8, picked up a built 350 and a turbo 350 tranny, putting Dana 44's under it

 

[CJ]

Im building a cj 8, picked up a built 350 and a turbo 350 tranny, putting Dana 44's under it

Sounds like a great project... Can't wait to see it in progress!

 

[deadfeat]

Is it an Alaskan postal jeep?

 

[fishinfool98]

Not a postal but im looking at buying a postal top and all 3 doors