wide

  1. Masscj7

    Wide Track CJ7 Sway Bar mounts

    In the process of my rebuild this afternoon and remounting the sway bar. I went through my Chiltons, my FSM, and my rebuild guide and cant seem to see any real mention of the sway bar. Two things. First, is there supposed to be a sleeve in the frame where through bolt goes through the frame...
  2. Vikingone

    Wide track?

    I see a lot on here about wide track Cj’s. Please educate me as to what this is and how to know if you have one. Sent from my iPhone using Tapatalk
  3. Vikingone

    Wide track?

  4. S

    Narrow track to Wide Track.. some questions

    I have found a set of W/T axles for my '80 '7. I am planning to swap the 6 bolt hubs from my n/t axles to the w/t. Question 1 - when i swap the hubs, do i need to use the N/T calipers or do i use the w/t calipers? are there any differences in the Rotors between w/t and n/t axles...
  5. M

    Wide Tires

    First time posting: I'm currently running MT 31x15.5 15s on 15x12 aluminum rims on an 85 CJ7 with a 2.5 in lift. The MTs have been on since 1994 and are ready to be replaced. They don't make that tire anymore so I'm looking for a narrower tire I can mount on the existing rims. Maybe a 33X13.5 or...
  6. Hedgehog

    Wide track axles?

    How wide are wide track axles? Can someone get a quick measurement brake dust shield to dust shield?
  7. M

    CJ7 Width (Could Someone do me a solid?:)

    Hey guys, Kind of an odd one here I'm looking at a new apartment here soon and I want to make sure my Jeep will fit in the garage Only problem is that my CJ is in storage and I won't be able to get to it until spring. SO I was wondering if anybody had a similar setup that could measure the...
  8. L

    Wide track or narrow track

    I recently purchased a 1980 CJ7 with 4.2 6 cyl. Standard transmission. It needs quite a bit of front end work. The part kits ask if the Jeep is narrow track or wide track. How do I find out which I have?
  9. D

    CJ7 Wide Track Tie Rod Tube and Drag Link Lengths?

    Hi All, Not near my '86 CJ7, I have a couple of questions and I need to order some tube today. Factory tie rod tube length (just tube, not the TREs)? Drag link, including sleeve (however you have it adjusted) length? I suppose for the drag, the bolt center to the end of the adjusting sleeve...
  10. C

    79 CJ 7 wide track rear axle swap

    My rear amc 20 shaft is split in 2. I want to replace the entire axle with one from a totally different vehicle. The amc 20 has given me too much grief. Running 31" tires, 3.54 gear. Will use mostly on highway, maybe sand dunes eventually. Yes, it is a wide track. 1. Should I keep the front dana...
  11. C

    79 CJ 7 wide track rear axle swap

    My rear amc 20 shaft is split in 2. I want to replace the entire axle with one from a totally different vehicle. The amc 20 has given me too much grief. Running 31" tires, 3.54 gear. Will use mostly on highway, maybe sand dunes eventually. Yes, it is a wide track. 1. Should I keep the front dana...
  12. J

    converting to wide track

    I have come across a pair of wide track axles recently. Since I am not happy with the SOA that the previous owner did, I am thinking of buying 4" lift springs and putting them on the wide axles and up under the jeep. I am trying to get a idea of what the jeep is going to look like and was...
  13. J

    converting to wide track

    I have come across a pair of wide track axles recently. Since I am not happy with the SOA that the previous owner did, I am thinking of buying 4" lift springs and putting them on the wide axles and up under the jeep. I am trying to get a idea of what the jeep is going to look like and was...
  14. A

    Front hub assembly too wide for wheels?

    What can I do? 83 Scrambler Dana 30 front axle Mickey Thompson Sidebiter 2 Wheel Just bought these brand new...got the back two mounted, now the issue. It does not appear that the center hole in the wheel is quite wide enough to fit over the factory hub assembly. Is there anything I can do?
  15. A

    Front hub assembly too wide for wheels?

    What can I do? 83 Scrambler Dana 30 front axle Mickey Thompson Sidebiter 2 Wheel Just bought these brand new...got the back two mounted, now the issue. It does not appear that the center hole in the wheel is quite wide enough to fit over the factory hub assembly. Is there anything I can do?
  16. M

    AMC 20 / Dana 30 Wide vs Narrow

    How can you tell the difference between wide and narrow? I have 3 axles that are what I believe to be a wide Dana 30, narrow Dana 30, and a narrow AMC 20. (All 3.54) I was going to use the narrow pair but the AMC 20 turned out to have rusted through on the underside of the mounts, that annoying...
  17. M

    AMC 20 / Dana 30 Wide vs Narrow

    How can you tell the difference between wide and narrow? I have 3 axles that are what I believe to be a wide Dana 30, narrow Dana 30, and a narrow AMC 20. (All 3.54) I was going to use the narrow pair but the AMC 20 turned out to have rusted through on the underside of the mounts, that annoying...
  18. J

    switching from narrow track to wide track need some advice

    I have an 81 cj 7 and a handle on some geared wide track axles. Still a Dana 30 and amc 20 but wide track and geared well. The front has high steer and the rear is heavily trussed for 4 link but doesn't have leaf brackets. Will the front bolt right in are the perches the same on wide track...
  19. J

    Wide Track versus Narrow Track versus ????

    Hey guys, newbie to the forum here. Hopefully a quick question. I have a 74 Cj5 with stock "narrow Track" axles (D30 f & D44r if I am not mistaken)& running 33x12.50 mud terrains. Last week I was given a set of Wide Track axles. Originally I was going to scrap them (which is why they were...
  20. J

    Wide Track versus Narrow Track versus ????

    Hey guys, newbie to the forum here. Hopefully a quick question. I have a 74 Cj5 with stock "narrow Track" axles (D30 f & D44r if I am not mistaken)& running 33x12.50 mud terrains. Last week I was given a set of Wide Track axles. Originally I was going to scrap them (which is why they were...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks