nut

  1. CJ

    Easy Way to Remove a Yoke Nut.

    At one time or another - most of us will get to the point where we have to remove the yoke from a differential or transmission. It's pretty easy to break the nut loose if the trans can be put in gear or if the differential is still in the vehicle. What do you do if you don't have an air wrench...
  2. Sparky1000

    Caliper anchor nut specs

    Does anyone know what the torque lbs on caliper anchor nuts is ?
  3. Sparky1000

    Caliper anchor nut specs

  4. E

    spindle nut socket size

    Can someone tell me what size socket fits the spindle nuts on a 1977 CJ front hub? Thanks!
  5. E

    spindle nut socket size

  6. L

    Stripped body mount nut

  7. FiNorman

    Is this a cage Nut?

  8. Kane

    heater box lever push nut size??

    Does anyone know the size I need to for the push nuts that are used to secure the cables to the heater box levers?
  9. Petescj

    Axle U joints Lock nut size

    So I went down to swap out my axle u joints but didnt get very far. Took off the caliper and hub and thought I had something for the lock nut for the rotor but... What size is that sucker 2 1/4 ? Its big. Anyone know the correct size? :)
  10. Petescj

    Axle U joints Lock nut size

    So I went down to swap out my axle u joints but didnt get very far. Took off the caliper and hub and thought I had something for the lock nut for the rotor but... What size is that sucker 2 1/4 ? Its big. Anyone know the correct size? :)
  11. C

    Front Wheel Drive Hub Clutch Nut Calibration (2wd Nut Location on Dial Screw)?

    Reassembling my front wheel drive locking hubs and, having cleaned and painted them, I removed the clutch, dial screw, clutch nut, spring and the cap that you turn to actuate the whole deal. I think I'm having a problem with the "default" 2wd location of the clutch nut on the dial screw. I tried...
  12. C

    Front Wheel Drive Hub Clutch Nut Calibration (2wd Nut Location on Dial Screw)?

    Reassembling my front wheel drive locking hubs and, having cleaned and painted them, I removed the clutch, dial screw, clutch nut, spring and the cap that you turn to actuate the whole deal. I think I'm having a problem with the "default" 2wd location of the clutch nut on the dial screw. I tried...
  13. C

    Pinion nut

    Hey guys just pulled out and replaced my transfercase output seal and my rear diff pinion seal. In doing so I guess I missed filing down a spot where the PO hit the pinion with a punch to lock the threads and I stripped out the threads on the pinion nut. Any one have an idea where I can get a...
  14. C

    Pinion nut

    Hey guys just pulled out and replaced my transfercase output seal and my rear diff pinion seal. In doing so I guess I missed filing down a spot where the PO hit the pinion with a punch to lock the threads and I stripped out the threads on the pinion nut. Any one have an idea where I can get a...
  15. R

    help!!! Spindle nut

    How do I get this off?
  16. R

    help!!! Spindle nut

    How do I get this off?
  17. D

    Security lug nut holding up spring leaf removal

    I've had the wheels off several times since purchase in 2009 - single-piece rear axles, front disc-rear drum brake overhaul, and one really good tire and wheel cleaning. After rebuilding the D300 I moved to the other bay of the garage, repacking all tools and parts in a much neater way than...
  18. Trigger

    Nut size for mounting speedometer?

    I've purchased several different size nuts to mount the stock speedometer in the dash to no avail....what the heck size are those studs?
  19. Davezilla

    Replace captive nut

    I just broke loose a captive nut in one of my bucket seats. Has anyone ever replaced one? If so, what did you do? I really do not want to buy new seats for my Jeep. Thanks for any help you can provide.
  20. csuengr

    Dana 300 output nut

    I stripped the output yolk nut on my tcase and was wondering if anybody has found a parts store replacement. Supposedly a Dana 30 pinion nut will fit, but haven't found one either.
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks