model

  1. CJ

    Holley Model 4160 Electric Choke Install

    Holley Model 4160 Electric Choke Install
  2. Patrick

    Model year identification

    Can someone help me identify model year and substantiate your answer on my CJ... The plate on the firewall shows model 57548 serial 69152. Thanks in advance.
  3. D

    CJ Jeep, Can you Decode Model Type?

    Hello, Is there any way to tell (from the manufacturers tag/VIN tag), which model (Base, Renegade, Golden Eagle, Levi’s, etc) that a particular Jeep CJ5 was built/sold as? I have owned two (a ‘75 and ‘79) CJ5 Jeeps for many years, but never saw them in “original” as-sold condition. They had...
  4. JeeperChris

    Anyone into Jeep model building?

    Ran across this and wondered if you guys are into Jeep models. This is definitely on my Xmas list: https://puralty.com/collections/mechanical-masterpieces/products/military-willys-jeep-building-kit And they have some other cool projects besides this. I'm getting one of their clocks for my...
  5. elkgroveguy

    Model 20 axle question

    I just picked up a model 20 narrow track. Has 4.10:1 gears, factory limited slip and 1 piece axles. The guy I bought it from says it was out of a 1972 cj5 and the 1 piece axles were factory? I have never heard of factory model 20 one pice narrow track axles? Does any one have any info on these...
  6. elkgroveguy

    Model 20 axle question

  7. DAVEG64

    74 Tub on later model frame?

  8. A

    CJ Model Year Confirmation

    Greetings, first time post as I just purchased two CJ5s. One has a VIN of 8305017 + serial number that decodes to a V6, left hand drive and the second VIN is 8505025 + serial number that decodes to a 4 cylinder right-hand drive. My question is how do you verify the year of these vehicles? I was...
  9. V

    new here and need help with model

    Hi everyone I recently bought my first jeep 1976 cj5 or so title says . My question is vin on firewall is accurate for 76 model but inside it has a compartment under pass. seat witch seems to be a older model from what I understand 75 - . Also it has a t150 trans and the floor cover plate was...
  10. G

    Amc model 20

    Just purchased this jeep,during a wheel seal replacement on r rear realized there had been a previous wheel bearing failure that had screwed up the housing end ware the bearing race seats,i put it back together the way it was just so I could move it, at this point it has not started leaking...
  11. G

    Amc model 20

    Just purchased this jeep,during a wheel seal replacement on r rear realized there had been a previous wheel bearing failure that had screwed up the housing end ware the bearing race seats,i put it back together the way it was just so I could move it, at this point it has not started leaking...
  12. ksouthw80

    switch

    Does anyone know where the reverse light switch is located on a T-150 transmission? Also, is this also the neutral safety switch?
  13. ksouthw80

    switch

    Does anyone know where the reverse light switch is located on a T-150 transmission? Also, is this also the neutral safety switch?
  14. b3uhbp

    What model is my weber?

    I'm trying to determine what model Weber carb I have so I can gets specs etc. for tuning. Any help would be greatly appreciated. Here is a picture of it.
  15. b3uhbp

    What model is my weber?

    I'm trying to determine what model Weber carb I have so I can gets specs etc. for tuning. Any help would be greatly appreciated. Here is a picture of it.
  16. C

    model 20 inner axle seals

    hey guys, just wondering, on the model 20, the inner axle seal, does it need to be pressed in from the inside out?
  17. C

    model 20 inner axle seals

    hey guys, just wondering, on the model 20, the inner axle seal, does it need to be pressed in from the inside out?
  18. A

    late model tilt

    Has aybody used a later model gm tilt column in a older 69 cj5 or somewhat close???????
  19. C

    model 20 bearing retainer

    hey guys, long story short I was at my stag a few weeks ago, I put a hole in my diff cover on my cj5 and roasted my axleshaft bearings, my main question I have, can I reuse the bearing retainers on my axleshafts? or do I have to get new ones? ive looked everywhere, and my local parts stores...
  20. C

    model 20 bearing retainer

    hey guys, long story short I was at my stag a few weeks ago, I put a hole in my diff cover on my cj5 and roasted my axleshaft bearings, my main question I have, can I reuse the bearing retainers on my axleshafts? or do I have to get new ones? ive looked everywhere, and my local parts stores...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks