death

  1. CJ

    Death Wobble

    Death Wobble
  2. CJ

    Curse of the Death Wobble Returns to Strike Again

    Curse of the Death Wobble Returns to Strike Again
  3. JMark

    Steering Help Tracking Down Death Wobble

    Looking for some insight on death wobble: 35 Goodyear mtrs, front D44. YJ OME springs. MORE shackles, Moog Ball Joints, Omix TREs and their HD steering setup. If I hit a big bump just right at super low speed while turning right such as an intersection she goes into death wobble. Dropping down...
  4. 1

    Death wobble bs bump steer

    Can anyone explain to me the difference between death wobble and bump steer? Or are they the same thing?
  5. 1

    1st Jeep, Death Wobble

    Hi. So i just purchased my childhood dream vehicle-1981 CJ7. The 120 mile ride home took hours. any little bump in the road sent the thing flying. I was literally white knuckled with both hands on the wheel. the previous owner put 31x10.5r15 tires on. he added new shackles raising it up about...
  6. YJeXtreme

    AMC20 Death

    Well about 1 1/2wk ago the drivers axle bearing took a :dung: on my CJ7... they had maybe 2500 miles on them. Instead of sinking more $$ into the M20 thats been fully rebuilt, i’ll be building a custom 9” Ford rear. Anyone in/near VA interested in M20 rear with 4.56 gears (2500-ish miles) &...
  7. C

    Victoria BC to Death Valley and back!

    We got home last night. 5200km and 17 days of camping fun. 80 hours of jeep driving! The only troubles were minor. The wiper linkage started jamming in Reno, I fixed it with a piece of heater hose (to squish and push it over centre to keep running). And we broke the hi lift jack mount off...
  8. C

    Victoria BC to Death Valley

    So, I'm posting this for two main reasons. If you see our Mighty CJ5 broken down along the way, stop and say hi! Or, if you frequent the Death Valley Area and want to show us around your stomping ground, we'd be all over that. We are planning on taking about four days to drive to Death...
  9. IOPort51

    Death in the tall grass

    replaced the rear pinion seal today. Not a major job but I am not a fan of laying on the concrete. I was out at my country estate/hay farm last week and came very close to getting stuck in the pasture. At the moment I am a big fan of locking differentials. I managed to bleed 90 wt all the way...
  10. IOPort51

    Death in the tall grass

    replaced the rear pinion seal today. Not a major job but I am not a fan of laying on the concrete. I was out at my country estate/hay farm last week and came very close to getting stuck in the pasture. At the moment I am a big fan of locking differentials. I managed to bleed 90 wt all the way...
  11. E

    Sudden death, no spark

    Hi guys. My Son's fist vehicle, a 1980 CJ5 Iron duke died on the highway. Just plain died outright. We have no spark at the plugs. I haven't worked on these Iron Duke ignitions, so where could I start? How can I diagnose the coil, module, pick-up, condensor? Has a new cap, rotor, wires, and...
  12. E

    Sudden death, no spark

    Hi guys. My Son's fist vehicle, a 1980 CJ5 Iron duke died on the highway. Just plain died outright. We have no spark at the plugs. I haven't worked on these Iron Duke ignitions, so where could I start? How can I diagnose the coil, module, pick-up, condensor? Has a new cap, rotor, wires, and...
  13. J

    Help!!!!!!!!!!!! 2003 TJ

    My sons 2003 tj has a front end wobble and I mean its bad!!!!. Its ok up to about 45 or 50 then the front end gose CRAZY!!!!. I almost wreaked ,it was that bad . We been thru the front end several times,changed tires,Had the tires re balanced. The tires are 33s . Had it to the shop several...
  14. J

    Death wobble

    So I got 5 brand new iroks on my 7 when I bought it but I didn't want to ruin them on the road so I bout a set of used 38x15.15x15 on 15x14 steel wheels. Jeep drove like a brand new jeep with the iroks, I put the others on and I can't break 30mph they have no balancing weights on them and I'm...
  15. mtnwhlr

    Death of Carrol Shelby

    We have lost one of the greastest automotive minds of all time Carrol Shelby has died. How many of you have dreamed of having a Shelby Corbra or a Shelby Mustang. May you rest in peace you will live on for ever here. :notworthy:
  16. L

    death

    Okay everyone, I have a 1999 xj. I’m working on putting a 4.5'' suspension lift under it. It is my daily driver so a little at a time and when budget allows. I am doing the "Budget lift" I have put springs out of the front of an old F150 and I have air shocks in the back for now. So its not...
  17. B

    Death Wander

    My 85 CJ8 Scrambler wanders all over the road. All front end parts have been replaced that needed to be replaced. Has had a recent front end alignment. A 4" superlift was installed back in 1993 including a drop pitman arm. Front spring bushings were replaced a year ago. Rebuilt OEM steering...
  18. Sasquach

    Death Valley Tips?

    Going to Death Valley in Dec. with the truck camper as base and doing day trips in the CJ checking out the terrain, mines, ghost towns, etc. It will be our first time there and looking for any info/tips from others who have been. Thanks.
  19. L

    death wobble

    First let me say hello to all im new here.I recently purchased a 1985 cj7 ,told it was a daily driver and let me tell you it wasnt.I have replaced all tie rods,drag link,shocks,tires and brakes.It does have a three inch shackle which is my question.Can it cause a wicked speed wobble ? Thanks for...
  20. L

    Micheal Jackson's cause of death is unvealed!

    as most people know, micheal died recently. and his cause of death was finally determined. He died from food poisoning.... he ate 12 year old wieners. :D haha sorry guys... just trying to have some fun out of it..:notworthy:
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks