arm

  1. defibvt

    Do I need a drop pitman arm?

    I have 4" s Superlift. As the title asks, is drop pitman arm in my future. Where do I get one if needed. Sent from my SM-G965U using Tapatalk
  2. JeepCJ5

    Transmission Torque Arm Mystery

    Hey guys, I'm almost ready to put my transmission back onto my Jeep. Looking at my transmission Torque Arm, I have this bracket on the end of it. It was obviously broken at some point in it's history before I got this CJ. My question is - what was it's purpose? When I Google the torque arm, I...
  3. L

    torque arm bushings w/pictures!

    Replacing the bushings while I've got it apart. I don't think the op had them installed correctly - now trying to figure out what's right. I did a search and believe I am close to having it correct, but it just doesn't look right to me... First picture has the outside bushing with the smaller...
  4. L

    torque arm bushings w/pictures!

  5. J

    OEM Steering arm lower coupler and new gear box

    Hey folks, I'm working on replacing my power steering pump and gear box and have run into a snag. The gear box I purchased doesn't appear to be compatible with the lower steering shaft coupling (OEM). The specs for the gear box are below: Input shaft spline count: 31 + Flat & Notch Input...
  6. J

    Removing Stubborn Pitman Arm

    I'm having a heck of a time removing my Pitman Arm. I've watched several YouTube videos and everyone uses air tools to zip it right off. Me on the other hand, I'm tightening the Pitman Arm screw and having to bang on the front of the Pitman Arm with a 3lbs sledge. I sprayed a bunch of bolt...
  7. F

    Drop pitman arm options

    Does anyone know if the drop pitman arms from a 76+ CJ will fit on my '73 cj5. In parts catalogs they have the same steering box I think, but the pitman arms are not. The reason I ask is because the 76+ arms are like half the price. ...or if you know of another OEM pitman arm from a different...
  8. J

    Torque arm mount help

    I plan to add a torque arm mount to my jeep as I noticed a lot of flexing in the trans even though the mounts seem new. I ordered the parts and this doesn't seem right the hole diameter seems to big. Also, the space between the mount and bushings seems excessive as well. Any help would be...
  9. J

    Torque arm mount help

  10. Mopedtony

    Wrong pitman arm???

    Please help I installed a 4" rough country lift on my 1986 cj7. All went well except the drop pitman arm is now right over the top of the tie rod that goes between the two front tires making the jeep undrivable due to every little tiny bump jams that tie rod up into the pitman arm. I've called...
  11. gert

    1 ton pitman arm

    Hey guys I'm trying to finish up my 1 ton high steer and didn't think about needing a pitman arm to match and the stock is to puny to team to fit, anybody have a part number or a link to where I can get one that fits the Saginaw power steering box? Also if your narrowing your own D44 close to...
  12. T

    Torque arm trouble

    Does anybody have any experience building a bam bar type torque arm for a cj7 with a 14 bolt? I have the torque arm from M.O.R.E. and it is installed correctly but the shackle end has way to much horizontal movement and puts everything in a bind. (The more it articulates in either direction the...
  13. M

    Window regulator arm channel

    In an attempt to fix my window issues I found a set of manual window regulators. Got the busted power windows out, and the manual regulators in, no problem. But the window regulator arm channel (that's what I'm calling it) the piece that attaches to the window and connects to the regulator is...
  14. J

    1974 CJ5 2.0 Lift. Upgrade Pitman Arm

    In the process of rebuilding a 1974 CJ5 4.2L from the ground up. I added a 2" lift. I understand higher lifts require a dropped pitman, wondering if a 2" lift also does. Thanks for any help you can provide.
  15. ksouthw80

    trans torque arm grommets

    I will be putting my t-150 trans back in tomorrow but I'm not 100% sure how the torque arm grommets go in. They were not there when I pulled it. Does anyone have a pic? I will have to get a bolt too. Anyone know the size by chance. Right now I only have a chiltons manual... Yes I know I should...
  16. ksouthw80

    trans torque arm grommets

    I will be putting my t-150 trans back in tomorrow but I'm not 100% sure how the torque arm grommets go in. They were not there when I pulled it. Does anyone have a pic? I will have to get a bolt too. Anyone know the size by chance. Right now I only have a chiltons manual... Yes I know I should...
  17. C

    Tie rod on TOP of steering arm?

    I just received my Rusty's HD tierod and drag link replacement today! Talk about beefy, at least compared to the stock components.:rolleyes: I was wondering if anyone here has gone ahead and installed their steering components on the top side of their steering arm? Are the holes tapered from...
  18. Westex

    Transmission Torque Arm

    Hey guys, quick question. I am going to start changing out the motor and tranmission mounts on my CJ5 and after reading through the forums have came across an issue. The PO built a custom skid plate and seems to have conveniently left out the torque arm when he remounted everything. So, I am...
  19. Westex

    Transmission Torque Arm

    Hey guys, quick question. I am going to start changing out the motor and tranmission mounts on my CJ5 and after reading through the forums have came across an issue. The PO built a custom skid plate and seems to have conveniently left out the torque arm when he remounted everything. So, I am...
  20. ljc61801

    Pitman arm recommendations?

    I'm working on a project Jeep... 1976 CJ 7 with power steering... bought as a project... pretty obviously has been touched by more than one set of hands, and seems like they were sometimes confused about what they were doing. It has a lift kit and the axles are flipped--enough clearance for the...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks