1973

  1. BrockGrimes

    1972 - 1973 CJ5 Wiring Diagram

  2. P

    1973 CJ mating up 80s Tub

  3. S

    1973 cj5 pass seat hold down

  4. K

    1973 CJ5 Seat Bracket

  5. 1

    1973 cj5 compatibility resources and opinions

    First let me thank those who have established this site as it seems to contain alot of valuable resources. That said, I recently purchased a 73cj5. The drive train looks to be pretty much stock with the dana 44 rear, dana 30 front, t15 3speed, dana 20 transfer case. The tub and hood are...
  6. dabbrowne

    Gas tank replacement CJ5 1973

    Hello I had strong gas smell coming from my Jeep. Determined it was the gas tank (old 21 gallon MTS plastic tank) Removed the tank and found that they two straps holding the tank in place caused the top of the tank to bend in and this caused a leak on the sending unit gasket (no longer flat...
  7. dabbrowne

    CJ5 1973 Gas Tank Repair

    Hello Any advice on where to get a sending unit for my gas tank? Also it looks like PO took off the carbon filter and the roll over check valve. Also PO connected one of the vent tubes back to the top of the gas filter by the carb and the other vent tube goes to the Liq check valve. Then...
  8. J

    1973 Wiper Pivot and Linkages

    It seem 1973 was a wierd year for Wiper linkage and pivot parts. Anyone know a link on where I could get the small pivot and linkage for a '73? Mine won't accept the clip anymore. My other option was to remove it, and try and modify it to accept a lock to hold the linkage in place. All the...
  9. S

    1973 fan clutch

    Hopefully I'm putting this in the right section.... I just bought a 73 cj5 and the previous owner put a flex fan on it, and i hate the noise. Wanting to switch it back to a clutch style, but parts stores are showing two different options....thermo controlled or centrifigally controlled...
  10. S

    1973 fan clutch

    Hopefully I'm putting this in the right section.... I just bought a 73 cj5 and the previous owner put a flex fan on it, and i hate the noise. Wanting to switch it back to a clutch style, but parts stores are showing two different options....thermo controlled or centrifigally controlled...
  11. S

    1973 cj5 spare tire carrier

    I'm looking for the factory spare tire carrier for my jeep. Tried to look for a pic of one and i've seen some pics of jeeps with side mounts and some with swing out mount. I would need one with the swing out mount since the tailgate coming down. Does anyone know who might have one or know...
  12. 7

    1971 CJ5 master cylinder relocation

    Okay guys, new to the forum. I have a very complicated scenario so bear with me while I explain. Several years ago I inherited a 1973 cj5 from my papa (still around but he passed it down to me). Long story short, the tub is now garbage. Rusted out, crushed by a barn, it's had it. Anyway I...
  13. C

    Build Thread 1973 Super Jeep Refurb

    Getting close to final coat of primer. And I've concluded that while I don't mind welding in repair panels I'm not yet very good at it. Chassis was done several years ago, body mounting points were in sufficiently short supply that I figured I needed to fix the body before I took a tub ride...
  14. J

    Oil Grade for a 1973 CJ5 (3.8)

    So I have a 1973 CJ5 (3.8) and wanted to know the best oil grade to use for it.
  15. turbojn997

    1973 CJ5 Dana 20 T-case question

    Hey guys! Alright. I'm working on a 1973 CJ5 with a Dana 20. It needs rear output shaft bearings. Anyone have experience with this? Does the t-case need to come all the way out? Or done in the Jeep? How much disassembly is needed for these 2 bearings? Thanks for your input! Jeff:)
  16. turbojn997

    1973 CJ5 Dana 20 T-case question

    Hey guys! Alright. I'm working on a 1973 CJ5 with a Dana 20. It needs rear output shaft bearings. Anyone have experience with this? Does the t-case need to come all the way out? Or done in the Jeep? How much disassembly is needed for these 2 bearings? Thanks for your input! Jeff:)
  17. L

    Newbie looking for 1973 -1975 CJ5 Passenger Seat Hold Down Bracket

    Hello All, I have recently purchased my first Jeep. It's a 1973 CJ5 and I have to admit it is quickly becoming one of my all time favorite vehicles. One item that was missing on it was the bracket that mounts to the floor of the jeep on the rear of the passenger seat to hold it down and keep...
  18. dabbrowne

    CJ5 1973 how to remove this?

    Hello I think my blinker switch is broken however I don't know how to remove this metal plate to get to the switch. Does anyone have experience/tips on removing this plate and replacing the blinker switch? Thank You DB
  19. 73CJ

    1973 CJ5 Commercial

    Ran across this 1973 CJ5 commercial :D 1973 AMC Jeep CJ5 Dealer Commercial - YouTube I love the air time they do!
  20. dabbrowne

    1973 CJ5 Breaks

    Hello Just a few easy ones (not easy for me :mad:). 1) My back break cylinder is leaking a very small amount of break fluid. How much is too much. You may be able to see it in this picture. 2) How do I remove the calipers on these disc breaks? Please see the picture. I can not find...
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks