Barrett Lake Trail - Sept 2019

Barrett Lake Trail - Sept 2019

JR74CJ5

Missing-Presumed Wheeling
Lifetime Supporter
Posts
5,832
Thanks
74
Location
Plumas Lake, CA, USA
Vehicle(s)
1974 CJ5 ~ Fresh built AMC 360 - SM420 - D20 - D30F with upgraded 30 spline shafts and knuckles & D44R - 4.27 Gears - ARB Lockers F/R - All chrome molly axles - on 33's - YJ 4" Lift Spring Conversion
Oakie, Cam, and I took a drive up and through Barrett Lake Trail in Central Eastern CA. Located in the Sierra NV Mountain Range of El Dorado National Forest.

More on the trail history and info here from the 4 wheel drive club that maintains trail for continued access.

http://hi-landers.com/BLT/BLT.html

To start, the gate is only about 85" - 86" wide to minimize issues further along with thin between trees and bridges etc.

We all fit through the gate though, so no issues, though the gate is in rocky ground, so you have to be on your game to get through without damage already...

Here's a few of Cam going through - he's the wide one of our bunch!

attachment.php


attachment.php


Right past the gate you turn up hill to hit the gatekeeper on the trail. For our rigs it's a bit tough and requires the right approach and line. I have a video of me going through it I will post soon. Here's a photo of Oakie partially though it.

attachment.php


and a few of us along the trail first day:

attachment.php


attachment.php


I'm having issues loading photos up to the site to link. Will edit post and add photos when I can... Stand by for continuing of thread...

:chug:
 

Attachments

  • IMG_2765.jpg
    IMG_2765.jpg
    101 KB · Views: 134
  • IMG_2764.jpg
    IMG_2764.jpg
    100.4 KB · Views: 124
  • IMG_2767.jpg
    IMG_2767.jpg
    99.5 KB · Views: 132
  • IMG_2773.jpg
    IMG_2773.jpg
    100.1 KB · Views: 102
  • IMG_2774.jpg
    IMG_2774.jpg
    97.3 KB · Views: 127
Last edited:
While I was spotting Oakie, I had him take a line that should have worked, but it slipped front tire off and he came down hard on his steering linkage. Bent the tie rod and z bar pitman arm a little. We worked on it a bit, and got it ok, but it bent again further along the trail. So we removed the highlift handle, and used it to straighten it in his recovery hooks in front of his jeep, then sleeved the tie rod with said handle, and duct taped it on to keep from moving around. He made it the rest of the trail like this.

attachment.php


attachment.php


We found some pretty challenging areas along this trail - here's some more eye candy:

attachment.php


attachment.php


attachment.php


:chug:
 

Attachments

  • IMG_2780.jpg
    IMG_2780.jpg
    97.5 KB · Views: 98
  • IMG_2776.jpg
    IMG_2776.jpg
    101.3 KB · Views: 123
  • IMG_2779.jpg
    IMG_2779.jpg
    100 KB · Views: 125
  • IMG_2798.jpg
    IMG_2798.jpg
    91.9 KB · Views: 92
  • IMG_2822.jpg
    IMG_2822.jpg
    96.5 KB · Views: 144
attachment.php


attachment.php


attachment.php


attachment.php


attachment.php
 

Attachments

  • IMG_2807.jpg
    IMG_2807.jpg
    101.8 KB · Views: 126
  • IMG_2833.jpg
    IMG_2833.jpg
    94.3 KB · Views: 148
  • IMG_2840.jpg
    IMG_2840.jpg
    98.3 KB · Views: 130
  • IMG_2827.jpg
    IMG_2827.jpg
    99.2 KB · Views: 142
  • IMG_2826.jpg
    IMG_2826.jpg
    94.2 KB · Views: 129
And some of Cam - his rig, and he, did really well on first rough trail together. It's a beast.

attachment.php


attachment.php


attachment.php


attachment.php


Looks Happy:

attachment.php


:chug: - More later - back to work...
 

Attachments

  • IMG_2802.jpg
    IMG_2802.jpg
    100.1 KB · Views: 142
  • IMG_2869.jpg
    IMG_2869.jpg
    96.3 KB · Views: 128
  • IMG_2888.jpg
    IMG_2888.jpg
    98.7 KB · Views: 134
  • IMG_2894.jpg
    IMG_2894.jpg
    96.9 KB · Views: 109
  • IMG_2806.jpg
    IMG_2806.jpg
    89.1 KB · Views: 122
Looks like a fun trail! :driving:
 
Looks like a fun trail! :driving:

I know you will have a blast on it. Thinking of a end of the trail ride extra trail thing for this one.
 
Nice fix !
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a donation.

Help support Jeep-CJ.com by making a donation.
Goal
$200.00
Earned
$0.00
This donation drive ends in
Back
Top Bottom
AdBlock Detected

I get it, I'm a Jeep owner and ad-block detectors kinda stink but ads are needed on this site. This is a CJ site, all the ads are set for autos (some times others get through.) I cannot make them just for Jeeps but I try.

Please allow ads as they help keep this site running by offsetting the costs of software and server fees.
Clicking on No Thanks will temporarily disable this message.
I've Disabled AdBlock    No Thanks